48 sonuçtan 25-36 arası gösteriliyor

6ES7138-4CA00-0AA0

35.00
SIMATIC DP, POWER MODULE PM-E FOR ET 200S; 24V DC WITH DIAGNOSIS.

6ES7151-1AA02-0AB0

260.00
SIMATIC DP, INTERFACE MODULE IM151-1 STANDARD FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUME 128BYTE

6GK7 543-1AX00-0XE0

SIMATIC S7-1500 to Industrial Ethernet, TCP/IP, ISO, UDP, S7 communication, IP Broadcast/ Multicast, security (VPN, Firewall) Diagnostics SNMPV1/V3, DHCP, FTP client/server, Email, IPv4/IPv6, IEEE 802.1X (radius), time-of-day synchronization via NTP, 1x RJ45 (10/100/1000 Mbit).

B&R 7CP474.60-1

800.00
2003 CPU 100 KB SRAM, 512 KB FlashPROM 24 VDC, 12,6 W supply 1 RS232 interface 1 CAN interface CAN: elec. isolated, network-capable 4 slots for screw-in ...

B&R 7DI138.70

400.00
2003 digital input module, 10 inputs 24 VDC

B&R 7IF371.70-1

370.00
2003 interface module, 1 CAN interface, usage only with frame driver, Electrically isolated, network-capable, Screw-in module

B&R X20 DO 8331

  • 8 digital outputs with 2 A
  • Sink connection
  • 1-wire connections
  • Power feed integrated in the module
  • Integrated output protection
The module is equipped with 8 outputs for 1-wire connections. The rated output current is 2 A. The output supply is fed directly to the module. An additional supply module is not needed. There is no connection between the module and the I/O supply potential on the bus module.

B&R X20 SI 9100

  • 20 safe digital inputs
  • 4 pulse outputs
  • Sink circuit
  • Software input filter configurable for each channel
This module is equipped with 20 safe digital inputs. It is designed for a nominal voltage of 24 VDC. The module can be used to read various digital signals in safety-related applications up to PL e or SIL 3. The module is equipped with filters that are individually configurable for switch-on and switch-off behavior. The module also provides pulse signals for diagnosing the sensor line. This module is designed for X20 12-pin terminal blocks.

B&R X20 SO 4120

  • 4 safe digital outputs with 2 A